Configure 2N Door Alarm

EvTrack Support Unauthorized Door Open Detection (Door Forced) and Door Open Too Long Detection Events (Prop) from 2N Helios API Devices.

Instructions

  1. Install a Hardware Door Monitor Switch
  2. Configure the 2N Switch Switch-On Duration
  3. Configure the 2N Door Open Sensor

Step 1: Install a Hardware Door Monitor Switch (Reference 2N Access Unit 599v3)

Step 2: Configure the Switch Switch-On Duration

The Switch-On duration will provide a timed window that will allow authorised access. If the Switch-On Duration is too short this will result in unnecessary false events

Step 3: Configure the 2N Door Open Sensor

  1. Configure the Door Sensor and select the Assigned Input and Input Mode
  2. Check “Unauthorized Door Open Detection” and “Door Open Too Long Detection”
  3. Specify the “Maximum Door Open Time”