Configure Tattile LPR Cameras

Instructions

Configure the following fields on the ANPR Camera:

  1. Plate Reader > General Settings > Site Address
  2. System > Network Settings > Hostname (Must match configured hostname on server)
  3. System > Network Settings > IP Address (Static IP Address recommended and Check Source IP Enabled for improve security and spoofing protection )
  4. Plate Reader > Plate Reader Settings > Char Size Pixel > Max Width and Max Height (Required for close up usages cases)
  5. Place Reader > Event/Actions Settings > OCR Reader TCP Message
  6. Place Reader > Event/Actions Settings > OCR Reader TCP Message > Enabled: Yes
  7. Place Reader > Event/Actions Settings > OCR Reader TCP Message > Message Format: XML
  8. Place Reader > Event/Actions Settings > OCR Reader TCP Message > Message: See below:
  9. Place Reader > Event/Actions Settings > OCR Reader TCP Message > Server IP
  10. Place Reader > Event/Actions Settings > OCR Reader TCP Message > Server Port
  11. Place Reader > Event/Actions Settings > OCR Reader TCP Message > Reuse Connection: NO
  12. System > Time Sync > Configure NTP

Tattile TCP Event Message

%NETBIOSNAME%DEVICE_SN%SITE_ADDRESS%PLATE%PLATE_STRING%PLATE_COUNTRY%DATE%TIME%IMAGE_BW%IMAGEID

Screenshots:

Plate Reader > General Settings

System > Network Settings

Plate Reader > Plate Reader Settings

Place Reader > Event/Actions Settings

Place Reader > Event/Actions Settings > OCR Reader TCP Message

System > Time Sync > Configure NTP